- Land and Ship Based - Reverse
Osmosis, Desalination Systems
-
- Welcome To Dime Water Inc.
- 2575 Fortune Way Suite J, Vista,
California 92081
- Phone: 760-734-5787 / Fax: 760-734-5798
- E-mail: sales@dimewater.com
- Industrial
Reverse Osmosis |
Commercial
Reverse Osmosis | Light Commercial Reverse Osmosis
| Nano
Filtration Systems |
- | Backwashing Filters | Reverse Osmosis Pretreatment | Custom
Water Treatment | Gas Powered Reverse Osmosis |
- | Sea
Water Purification Units |Agriculture/Farm Water
Filters | Water Softeners
| Deionization Systems | Hassle
Free Online Quote |
- |Water
Store Purification Equipment | Hemodialysis
Reverse Osmosis Equipment | RO Skid Units | Water
Treatment Directory |
- Patented Salt Free Hard Water
Conditioners:
- aquafer waterSource
| Maxi-Cure | ESF | Dealer
Opportunities | Natures Balanced
Water | Home Page |
There are significant differences
in the reverse osmosis equipment used for removing most of the
dissolved solids from seawater and from most surface or well waters.
Seawater units are referred to as desalinators and surface/well
water units are called reverse osmosis (RO) systems. The laws
of physics require approximately 1 psi driving force for each
100 mg/l of solids dissolved in the water to be treated. Seawater
has about 35,000 mg/l of dissolved solids so to obtain the first
drop of permeate water a pressure of 350 psi is required. Reverse
osmosis units on the other hand normally treat water where the
dissolved solids content is in the area of 6,000 mg/l or less.
The required pressure for that first drop of water for 6,000 mg/l
is 60 psi. To insure an adequate flow of water from the respective
devices seawater units usually operate in the area of 1,000 psi
and REVERSE OSMOSIS units in a range of 150 to 250 psi. This additional
pressure requirement for seawater increases the required strength
of almost all components and requires much larger pumps. Also,
seawater is extremely corrosive so the materials of construction
for seawater units must be non-corrosive. All of these differences
cause the cost of seawater units to be much higher than the cost
of an equivalent gallon output RO unit.
DESALINATION SYSTEMS
CUSTOM DESIGNED systems are available in sizes from 225
to 15,000 gallons per day. All sea water systems are computer
designed with the materials of construction, pump power source
(electric, gas and diesel), control system and envelope size developed
with the customer for each application.
We have supplied dozens of sea
water units for ship as well as bore hole applications with units
in operation in the Pacific Rim, Mexico, and along the US Coast.
We have also built custom multi-pass systems for research laboratory
use in brine concentration. Multiple pre-treatment processes are
available such as ozone, ultraviolet light, chemical feed and
multi-media filtration.
- Our products
are marketed in the U.S. as well as worldwide. We have water
purity systems in virtually every state as well as in Japan,
China, Malaysia, South America, Russia and most European countries.
-
- Export negotiations
and shipping is our specialty.
-
- Compact Seawater
Reverse Osmosis Systems
|
|
MODEL |
- GALLONS
- PER DAY
|
- SIZE-INCHES
- L W H
|
SHIP WT LBS |
Hp |
|
SWRO-225 |
225 |
30 24 24 |
80 |
.75 |
|
SWRO-500 |
500 |
50 24 24 |
100 |
1.50 |
|
SWRO-700 |
700 |
50 24 24 |
150 |
1.50 |
|
SWRO-850 |
800 |
50 24 24 |
200 |
2.00 |
|
SWRO-1200 |
1200 |
50 24 24 |
250 |
3.00 |
All units have the following standard features:
- Constructed for sea or land use
- Fiberglass element housing(s)
- Long-life aluminum frame
- Stainless fitted pressure pump
- 3 stages of pre-filtration
- Pre-filter pressure gauges (2)
- Inlet ESF for scale prevention
- Low pressure shut-off
- 20% Recovery. Permeate TDS <200 PPM
- Check valve on permeate
- 30/50 pressure tank shut-off valve
- Ball bearing motor
- High pressure safety valve
- Stainless steel pressure valve
- Status lights
Available options:
- Dual switches for atmospheric storage tank
(s)
- Re-pressure pump for tank. 12 GPM.
- Permeate TDS monitor
- Frame casters to facilitate land installation
- Permeate and drain flow meters Pair
- Inlet delivery pump
- Export crating
- 300 gallon atmospheric tank. 35” dia.
x 84” high
- 500 gallon atmospheric tank. 46” dia.
x 82” high
- Stainless steel frame
-
Emergency
Non Electric Gas Powered Reverse Osmosis Water Purifier
|
-
- Portable Gas Powered Reverse Osmosis
Sea Water Filter
|
MODEL |
- GALLONS
- PER DAY
|
- SIZE-INCHES
- L W H
|
SHIP WT LBS |
PUMP
Hp |
|
DRO-225GSW |
225 |
48 24 36 |
280 |
.75 |
|
DRO-500GSW |
500 |
48 24 36 |
300 |
1.50 |
|
DRO-700GSW |
700 |
48 24 36 |
350 |
1.50 |
|
DRO-850GSW |
850 |
48 24 36 |
400 |
2.00 |
|
DRO-1200GSW |
1200 |
48 24 36 |
450 |
3.00 |
All units have the following standard features:
- Constructed for ships, yachts, home, business,
hotel or land use
- 7 gallon fuel tank for 10hr. run time
- Models SWGP-225 Thru SWGP-850: 10Hp Generator
/ KWH: 5.3
- Model SWGP-1200: 11Hp Generator / KWH 6.0
- Fiberglass element housing(s)
- Long-life aluminum frame
- Stainless fitted pressure pump
- 3 stages of pre-filtration
- Pre-filter pressure gauges (2)
- Inlet ESF for scale prevention
- Low pressure shut-off
- 20% Recovery. Permeate TDS <200 PPM
- Check valve on permeate
- 30/50 pressure tank shut-off switch
- Ball bearing motor
- High pressure safety valve
- Stainless steel pressure valve
- Status lights
- For additional information please e-mail:
sales@dimewater.com
-
Available options:
- Dual switches for atmospheric storage tank
(s)
- Re-pressure pump for tank. 12 GPM.
- Permeate TDS monitor
- Frame casters to facilitate land installation
- Permeate and drain flow meters Pair
- Inlet delivery pump
- Export crating
- 300 gallon atmospheric tank. 35” dia.
x 84” high
- 500 gallon atmospheric tank. 46” dia.
x 82” high
- Stainless steel frame
-
-
-
