- Welcome To Dime Water Inc.
- 2575 Fortune Way Suite J, Vista,
California 92081
- Phone: 760-734-5787 / Fax: 760-734-5798
- E-mail: sales@dimewater.com
- Industrial
Reverse Osmosis |
Commercial
Reverse Osmosis | Light Commercial Reverse Osmosis
| Nano
Filtration Systems |
- | Backwashing Filters | Reverse Osmosis Pretreatment | Custom
Water Treatment | Gas Powered Reverse Osmosis |
- | Sea
Water Purification Units |Agriculture/Farm Water
Filters | Water Softeners
| Deionization Systems | Hassle
Free Online Quote |
- |Water
Store Purification Equipment | Hemodialysis
Reverse Osmosis Equipment | RO Skid Units | Water
Treatment Directory |
- Patented Salt Free Hard Water
Conditioners:
- aquafer waterSource
| Maxi-Cure | ESF | Dealer
Opportunities | Natures Balanced
Water | Home Page |
COMMERCIAL WATER
SOFTENERS
The Water Softening process
is primarily designed to remove calcium ions from the water. The
calcium hardness of the water causes scale in heaters and pipes
develop soap scum and creates unwanted precipitates in many water
- based products. However, because the cation resin that is used
for this process is not selective to calcium, the resin will also
remove magnesium, ferrous (clear as drawn) iron, traces of metals
such as copper, aluminum, zinc and radium. During the removal
process the above listed ions are replaced or exchanged for sodium
if sodium chloride is used as a regenerating chemical or potassium
if potassium chloride is used. By their nature, neither sodium
nor potassium will cause scale, interfere with soap or normally
create precipitates.
When a water softener is regenerated
we normally emply the steps of backwash, brine draw, slow rinse
and rapid rinse. The backwash discharge is chemically the same
as the raw water, the brine draw and slow rinse waters contain
the ions removed during the softening process plus some sodium
or potassium and are high in chlorides. The rapid rinse water
is softened water.
Full knowledge of the chemistry
of the water to be softened as well as the application of the
softened water (laundry, boiler feed, process water, condensate
polishing, etc..) enables us to fine tune the design for maximum
salt use efficiency, minimum pressure drop, minimum regeneration
waste water discharge and lowest capital cost.
Custom units utilizing special
meter controls, high kinetic resins, brine water diversion valves,
high flow resins mixed mdia and special tank construction are
a specialty of Dime Water Inc. We have supplied custom
equipment worldwide for boilers, car washed, hospitals, laboratories,
laundries, food processors, chemical manufacturers, cosmetic firms,
farms and paper processors to name a few.
- Our products
are marketed in the U.S. as well as worldwide. We have water
purity systems in virtually every state as well as in Japan,
China, Malaysia, South America, Russia and most European countries.
-
- Export negotiations
and shipping is our specialty.
-
-
-
- AFT
SERIES
- Alternating
Twin Tank
Commercial
Water Softeners
|
|
Model # |
*(1) |
*(2) |
*(3) |
*(4) |
*(5) |
*(6) |
*(7) |
*(8) |
*(9) |
|
AFT-16-1 |
16K |
7x44 |
0.6 |
3/4" |
18x40 |
400 |
12 |
18 |
1.2 |
|
AFT-24-1 |
24K |
8x44 |
0.76 |
3/4" |
18x40 |
400 |
13 |
17 |
1.5 |
|
AFT-32-1 |
32K |
9x48 |
1 |
3/4" |
18x40 |
400 |
14 |
19 |
2 |
|
AFT-48-1 |
48K |
10x54 |
1.5 |
3/4" |
18x40 |
400 |
13 |
18 |
2.4 |
|
AFT-64-1 |
64K |
10x60 |
2 |
3/4" |
18x40 |
400 |
12 |
16 |
2.4 |
|
AFT-80-1 |
80K |
13x54 |
2.6 |
3/4" |
18x40 |
400 |
14 |
17 |
4 |
|
AFT-60-1.5 |
60K |
12x52 |
2 |
1.5" |
24x54 |
1000 |
28 |
39 |
3.5 |
|
AFT-90-1.5 |
90K |
14x65 |
3 |
1.5" |
24x54 |
1000 |
31 |
42 |
5 |
|
AFT-120-1.5 |
120K |
16x65 |
4 |
1.5" |
24x54 |
1000 |
34 |
48 |
6 |
|
AFT-150-1.5 |
150K |
21x62 |
5 |
1.5" |
24x54 |
1000 |
42 |
66 |
12 |
|
AFT-180-1.5 |
180K |
21x62 |
6 |
1.5" |
24x54 |
1000 |
41 |
64 |
12 |
|
AFT-210-1.5 |
210K |
21x62 |
7 |
1.5" |
24x54 |
1000 |
39 |
62 |
12 |
|
AFT-240-1.5 |
240K |
24x71 |
8 |
1.5" |
24x54 |
1000 |
43 |
67 |
15 |
|
AFT-270-1.5 |
270K |
24x71 |
9 |
1.5" |
24x54 |
1000 |
42 |
65 |
15 |
|
AFT-300-1.5 |
300K |
24x71 |
10 |
1.5" |
24x54 |
1000 |
41 |
54 |
15 |
|
AFT-450-1.5 |
450K |
30x72 |
15 |
1.5" |
30x48 |
|
62 |
25 |
25 |
- (*1) : Max. Grains Capacity
Per Tank
(*2) : Tank Sizes
(*3) : Resin Media (cu. ft) Per Tank (2)
(*4) : Pipe Size
(*5) : Brine Tank Size
(*6) : Brine Tank Storage lbs.
(*7) : Service Flow Rate Cont. (gpm)
(*8) : Service Flow Rate Peak (gpm)
(*9) : Backwash Flow Rate
- Larger systems available up
to 3,600,000 grains removal capacity.
-
- DCS
SERIES
- Commercial
Water Softeners
|
-
- Model #
|
Max. Grains Removal |
Tank Size |
- Media
- (cu. ft)
|
Salt lbs. |
Pipe Size |
- Brine Tank Size
|
- Continuous Flow Rate (1)
|
- Peak Flow rate (2)
|
|
SCWS-60-1 |
60k |
12x52 |
2 |
30 |
1 |
18x40 |
16 |
21 |
|
SCWS-60-1.5 |
60K |
12x52 |
2 |
30 |
1.5 |
18x40 |
27 |
40 |
|
SCWS-60-2 |
60K |
12x52 |
2 |
30 |
2 |
18x40 |
32 |
50 |
|
SCWS-90-1 |
90K |
14x65 |
3 |
45 |
1 |
18x40 |
17 |
22 |
|
SCWS-90-1.5 |
90K |
14x65 |
3 |
45 |
1.5 |
18x40 |
31 |
43 |
|
SCWS-90-2 |
90K |
14x65 |
3 |
45 |
2 |
18x40 |
39 |
53 |
|
SCWS-120-1 |
120K |
16x65 |
4 |
60 |
1 |
24x40 |
18 |
23 |
| SCWS-120-1.5 |
120K |
16x65 |
4 |
60 |
1.5 |
24x40 |
35 |
45 |
|
SCWS-120-2 |
120K |
16x65 |
4 |
60 |
2 |
24x40 |
48 |
65 |
|
SCWS-150-1 |
150K |
21x62 |
5 |
75 |
1 |
24x40 |
20 |
25 |
|
SCWS-150-1.5 |
150K |
21x62 |
5 |
75 |
1.5 |
24x40 |
42 |
57 |
|
SCWS-150-2 |
150K |
21x62 |
5 |
75 |
2 |
24x40 |
68 |
85 |
|
SCWS-180-1 |
180K |
21x62 |
6 |
90 |
1 |
24x54 |
19 |
24 |
|
SCWS-180-1.5 |
180K |
21x62 |
6 |
90 |
1.5 |
24x54 |
41 |
54 |
|
SCWS-180-2 |
180K |
21x62 |
6 |
90 |
2 |
24x54 |
64 |
81 |
- Larger commercial water filters
available up to 1,200,000 grains removal capacity.
-
-
-
-
